X
Product was successfully added to your shopping cart.

Continue Shopping

Fire & Intrusion Detector

Fire, heat, smoke, glass breakage and other detectors for a variety of applications.

6 Item(s)

per page
  1. Bosch F220 Series Accessories

  2. Bosch D263 Smoke Detector

    The D263 Series Detector models use an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and to reduce dust accumulation and nuisance alarms. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector.
  3. Bosch D273 Smoke Detector

    The D273 Series Detector models use an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and reduce dust accumulation and nuisance alarms. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the detector signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector. When a D132B Reversing Relay Module is used, the LED does not latch on alarm.
  4. Bosch DS1100i

    The Bosch DS1100i uses microprocessor-based Sound Analysis Technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1100i can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer of false alarm hazards in harsh environments. A round cover design in available.
  5. Bosch F220-P

    The Bosch F220-P Photoelectric Smoke Detector uses the light scatter technique using a pulsed infrared source operating with a gated high-speed photodiode infrared sensor and a symmetrical optical chamber that allows uniform 360-degree smoke entry while increasing immunity to external light. Head only, needs base. The F220-P detectors are UL Listed, open-area Photoelectric Smoke Detectors designed for use with commercial fire protective signaling systems and household fire warning systems (refer to NFPA 72, The National Fire Alarm Code). By utilizing low-current electronic circuitry, the F220-P detectors can be connected to a wide range of power source circuits.
  6. RedSky Parts

    Products and parts from RedSky.

6 Item(s)

per page