X
Product was successfully added to your shopping cart.

Continue Shopping

Power Device

Low voltage power supplies for security cameras and other devices.

1 to 10 of 74 Total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. APC XS 1300 Accessories

  2. Altronix 6062 Multi-Purpose Timer Module

    The Altronix 6062 Multi-Purpose Timer Module is suitable for many functions that require a timed operation, such as access control applications, siren/bell cut-off module, dialer delay, or guard tour supervisory timer. It has a quick and extremely accurate time range adjustment from 1 sec. to 60. Optional functions include: one shot, delayed release, delayed operate, delayed pulse and pulser/flasher. It has a built-in reset feature a repeat (pulser/flasher) mode. DIN Rail Mount version is available.
  3. Altronix ACM8E Access Power Controller

    The ACM8E Access Power Controller converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an access control system, card reader, keypad, push button, or PIR. The unit will route power to a variety of access control hardware devices including mag locks, electric strikes, magnetic door holders, etc. Outputs will operate in bothf fail-safe and/or fail-secure modes.
  4. Altronix AL1012ULACM Power Supply-Charger

    The AL1012ULACM Power Supply-Charger converts an 115 VAC 60Hz input into eight (8) independently controlled 12VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an access control system, card reader, keypad, push button, PIR, etc. These units will route power to a variety of access control hardware devices including mag locks, electric strikes, magnetic door holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables emergency egress, alarm monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
  5. Altronix AL1024ULACM Power Supply-Charger

    The AL1024ULACM Power Supply-Charger converts an 115 VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. AL1024ULACM Power Supply-Charger will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
  6. Altronix AL125UL Power Supply-Charger

    The AL125UL Power Supply-Charger is a power-limited power supply/charger that will convert 115 VAC 50/60Hz input into two individually PTC-protected 12VDC or 24VDC outputs. It is intended for use in applications requiring UL Listing for Access Control (UL294) and applications requiring an interface with fire alarm control panels. It has a filtered and electronically regulated output. It is a built-in charger for sealed lead acid or gel type batteries. Includes power supply, transformer and enclosure.
  7. Altronix AL175ULX Power Supply-Charger

    The Altronix AL175ULX Power Supply-Charger power limited power supply/charger will convert 115 VAC / 60Hz input into two individually PTC protected 12VDC or 24VDC outputs. It has a 1.75 amp continuous supply current and a class 2 Rated power limited output. The maximum charge current is 400mA. It can automatically switch over to stand-by battery when AC fails.
  8. Altronix AL300ULPD4 Power Supply-Charger

    Altronix AL300ULPD4 Power Supply-Charger multi-agency approved multi-output power supply/chargers convert a 115 VAC/60Hz input to four (4) or eight (8) class 2-rated 12VDC or 24VDC power limited outputs. AL300ULPD4 Power Supply-Charger has a 2.5 amp supply current and electronically regulated outputs. Maximum charge current is .7 amp. It automatically switches over to stand-by battery when AC fails (zero voltage drop). Gray enclosure.
  9. Altronix AL400ULACM Power Supply-Charger

    The AL400ULACM Power Supply-Charger converts a 115 VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 4 amp @ 12VDC or 3 amp @ 24VDC continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. These units will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes.
  10. Altronix AL400ULM Power Supply

    Altronix AL400ULM Power Supply is specifically designed for use with access control systems and accessories. This unit converts a 115 VAC / 60Hz input into five (5) individually protected, class 2-rated, power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.

1 to 10 of 74 Total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Barcodes, Inc.